GCS900 3D

GCS900 The Trimble GCS900 3D Grade Control System can be installed on motor graders to put the site plan - design surfaces, grades and alignments - inside the cab.

Grading

  • Measure the position and blade slope with the single GNSS antenna configuration
  • Measure the exact position, very accurate cross slope and the heading of the blade with dual GNSS

GCS900 Finished Grade

  • Achieve finished grade to millimeter accuracy with fewer passes
  • Place finished grade materials more accurately and in a shorter time period, keeping material costs to a minimum and realizing better profits

Used with a total station, single or dual GNSS receivers, GCS900 3D is well suited for grading and fine grading applications such as:

  • Material spreading
  • Highway and railway construction
  • Airport construction
  • Concrete pours and slab placement
  • Residential and commercial site construction

Dual GNSS    

Measures the exact position, cross slope and heading of the blade for rough grading and mass excavation on steep slopes and complex design surfaces

Single or Dual GNSS with Laser Augmentation      

Single and dual GNSS systems enhanced with laser augmentation to improve vertical accuracy for high accuracy guidance to complex design surfaces such as super-elevation grading for rough through finished grade work

Universal Total Stations      

Total station-based system for extreme accuracy for lift and layer control, material monitoring, or where GNSS is not the ideal solution because of overhead obstructions

GCS900 2D

GCS900 The Trimble GCS900 2D Grade Control System for motor graders is an excellent first investment for contractors new to construction technology.

Grading

  • Measure the lift and tilt of the blade with a single laser and laser receiver
  • Measure the slope of the blade by adding another laser receiver or a slope sensor
  • Get to grade more accurately and quickly with in-cab elevation and slope guidance
  • Upgrade to a 3D grade control system as your organization grows

GCS900 Finished Grade

  • Achieve tight tolerances and a smooth finished grade with precise vertical guidance.
  • Calculate the cross-slope of the blade using two angle sensors and a rotation sensor
  • Add a laser receiver or a sonic tracer to measure elevation
  • Trace stringline, previous pass, or curb and gutter with a sonic tracer
Using the 2D system with a sonic sensor or a grade laser to improve the efficiency and productivity of your motor grader on projects such as:
  • Road and highway projects
  • Land reclamation projects
  • Dam and reservoir construction
  • New infrastructure projects

Cross-slope Only 

Cross-slope control system to be used on motor graders for fine grading work for road maintenance, ditches and slope work

Single Elevation Plus Cross-slope     

Single control system uses a laser or sonic receiver to control the lift of the machine blade for flat, slopework and finished grading

Dual Elevation     

Dual control system that uses two laser or sonic receivers for higher accuracy lift control. Blade edge can be controlled independently or linked

Grade Control for Motor Graders 1

Top Selling Categories