Spectra DG613 Pipe Laser



Key Features

  • Shorter length
  • Grade range -12% to +40%
  • Self-leveling over the entire grade range and full cross axis compensation
  • Ultra-fast beam movement
  • Operating range up to 150 m (500 ft) with radio / IR remote control
  • Big and intuitive graphic display at the laser and remote control (similar to UL633)
  • IP68 protection (dust and waterproof)
  • Flexible power options (NiMH / Alkaline)
  • Advanced functions squeezing working time: Line Set/Check (first day setup), LineScan (second day setup) and Line Alert
  • Automatic functions for beam alignment, beam detection, and grade calculation (DG813 only)

DG613 Data Sheet

DG613 User Guide

DG613 Quick Card

DG613 Setup Guide

3 in stock

SKU: 7788 Category:


Compact and Powerful.

The Spectra Precision DG613 Pipe Laser is built for efficiency, accuracy and reliability when laying pipes.

The length of the DG613 has been reduced to make it easier to set up the lasers into tight inverts in the manhole.
The DG613 has a grade range from -12% to +40% and is fully self-leveling over the entire grade range.
Even the cross axis is fully compensated, providing quick set up and peace of mind that the laser will be level
without having to adjust at the bottom of the invert.

The DG613 works over a distance of 150m (500ft) providing full operation in a single set-up between manholes.
The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to
150 meter (500 feet) control. For “over-the-top” setups, the remote utilizes radio communications up to a distance
of 130 meter (430 feet).

Flexible power options provide 40 hours operating time with NiMH rechargeable batteries and 50 hours with alkaline
batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car
charger is available for work in remote areas.

Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via
graphical menu which makes it simple and easy to use – no secret button pressing and short learning curve means it
can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the
RC803 remote control.

DG613 advanced functions make setting up easier and more accurate:

  • Line-Set, check allows the laser to shoot the beam upwards to align to the next manhole from a short, deep trench
    as the beam will move up to 100% in seconds.
  • Line scan allows the beam to sweep quickly (left and right) and can be stopped on the target at the bulls-eye
    position using the remote control.
  • Line Alert is automatically activated once the grade and alignment are set –warning the user that the set-up has been
    disturbed, avoiding costly errors and re-work.
  • The DG613 has a bright beam that can be easily spotted in the pipe and enhanced with the patented target that bends
    the beam upwards making it easy to see when looking down at the pipe reducing the need to bend down to see the beam
    when in the trench or standing above the trench. Multiple attachments are available allowing the DG613 to be mounted
    in pipes of any size from 150mm (6 inch) upwards. A blower is also available to evenly circulate air through the pipe
    to avoid refraction of the beam inside the pipe.

Additional information

Weight 60.63 kg
Dimensions 63.5 × 26.67 × 53.34 cm


There are no reviews yet.

Be the first to review “Spectra DG613 Pipe Laser”

Your email address will not be published. Required fields are marked *