Compact and Powerful.
The Spectra Precision DG613G Pipe Laser is built for efficiency, accuracy and reliability when laying pipes.
The length of the DG613G has been reduced to make it easier to set up the lasers into tight inverts in the manhole.
The DG613G has a grade range from -12% to +40% and is fully self-leveling over the entire grade range. Even the
cross axis is fully compensated – providing quick set up and peace of mind that the laser will be level without
having to adjust at the bottom of the invert.
The DG613G works over a distance of 150m (500ft) providing full operation in a single set-up between manholes.
The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to
150 meter (500 feet) control. For “over-the-top” setups, the remote utilizes radio communications up to a distance
of 130 meter (430 feet).
Flexible power options provide 30 hours operating time with NiMH rechargeable batteries. Alkaline batteries can be
used directly at the laser without a separate battery pack. An additional car charger is available for work in remote
Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via
graphical menu which makes it simple and easy to use – no secret button pressing and short learning curve means it can
be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803
DG613G advanced functions make setting up easier and more accurate:
- Line-Set, check allows the laser to shoot the beam upwards to align to the next manhole from a short, deep trench as the beam will move up to 100% in seconds.
- Line scan allows the beam to sweep quickly (left and right) and can be stopped on the target at the bulls-eye position using the remote control.
- Line Alert is automatically activated once the grade and alignment are set –warning the user that the set-up has been disturbed, avoiding costly errors and re-work.
- The DG613G has a bright beam that can be easily spotted in the pipe and enhanced with the patented target that bends the beam upwards making it easy to see when
looking down at the pipe reducing the need to bend down to see the beam when in the trench or standing above the trench. Multiple attachments are available
allowing the DG613G to be mounted in pipes of any size from 150mm (6 inch) upwards. A blower is also available to evenly circulate air through the pipe to
avoid refraction of the beam inside the pipe.